Certified Company
-
-
Opening Hours
Mon-Fri 8am - 5pm
Opening Hours
| Rod D1Ø | 10MM | 0.39" | |
|---|---|---|---|
| Cylinder D2Ø | 28MM | 1.10" |
| Stroke lengths (S): | 20-600MM | 0.79" - 23.62" | |
|---|---|---|---|
| Retracted length RL: | Stroke + 95MM | 3.74" | (shortest possible) |
| Extended length EL: | Retracted Length + Stroke | + connecting parts |
| X: | 10MM | 0.39" |
|---|
| Force (F1) range: | 100-1500N | 22.50-338Lbs |
|---|
| Rod: | QPQ | ||
|---|---|---|---|
| Cylinder: | Black |
| Damping: | No | ||
|---|---|---|---|
| Speed: | Normal | ||
| Working temperature: | -35°C +90°C | -31°F +194°F | |
| Progression ( approx.): | 60% |
| Part # 675 | Threaded ends M8x1.25 | ||
|---|---|---|---|
|
|
L: 11MM | 0.43" |
| Retracted Length (RL): Stroke + 95MM / 3.74" ( shortest possible ) | |||
| Extended length (EL): Stroke*2 + 95MM / 3.74" |
| Part # 675.1 | Eye ends E8 | ||
|---|---|---|---|
|
|
A: M8x1.25 B: Ø8.1MM C: 16MM D: 20MM E: 10MM |
0.319" 0.63" 0.79" 0.39" |
| Retracted Length (RL): Stroke + 135MM / 5.31" ( shortest possible ) | |||
| Extended length (EL): Stroke*2 + 135MM / 5.31" |
| Part # 675.2 | Clevis ends C8 | ||
|---|---|---|---|
|
|
d2: M8x1.25 d1: Ø8MM B: 8MM G: 16MM L1: 42MM L2: 32MM |
0.315" 0.315" 0.63" 1.65" 1.26" |
| Retracted Length (RL): Stroke + 159MM / 6.26" ( shortest possible ) | |||
| Extended length (EL): Stroke*2 + 159MM / 6.26" |
| Part # 675.3 | Angle ball joint ends A8 | ||
|---|---|---|---|
|
|
d2: M8x1.25 d2/1: M8x1.25 A: 30MM d1: ball Ø13MM L2: 16.5MM |
1.18" 0.65" |
| Retracted Length (RL): Stroke + 155MM / 6.10" ( shortest possible ) | |||
| Extended length (EL): Stroke*2 + 155MM / 6.10" |
| Part # 675.12 | Rod end bearing RB8 | ||
|---|---|---|---|
|
|
d3: M8x1.25 L1: 36MM d1: Ø8MM L2: 24MM |
1.42" 0.315" 0.94" |
| Retracted Length (RL): Stroke + 167MM / 6.57" ( shortest possible ) | |||
| Extended length (EL): Stroke*2 + 167MM / 6.57" |
| Part # 676 | Threaded ends M10x1.50 | ||
|---|---|---|---|
|
|
|
L: 11MM | 0.43" |
| Retracted Length (RL): Stroke + 95MM / 3.74" ( shortest possible ) | |||
| Extended length (EL): Stroke*2 + 95MM / 3.74" |
| Part # 676.1 | Eye ends E10 | ||
|---|---|---|---|
|
|
A: M10x1.50 B: Ø8.1MM C: 19MM D: 25MM E: 12MM |
0.319" 0.75" 0.98" 0.47" |
| Retracted Length (RL): Stroke + 145MM / 5.71" ( shortest possible ) | |||
| Extended length (EL): Stroke*2 + 145MM / 5.71" |
| Part # 676.2 | Clevis ends C10 | ||
|---|---|---|---|
|
|
d2: M10x1.50 d1: Ø10MM B: 10MM G: 20MM L1: 52MM L2: 40MM |
0.39" 0.39" 0.79" 20.05" 1.58" |
| Retracted Length (RL): Stroke + 175MM / 6.89" ( shortest possible ) | |||
| Extended length (EL): Stroke*2 + 175MM / 6.89" |
| Part # 676.3 | Angle ball joint ends A10 | ||
|---|---|---|---|
|
|
d2: M10x1.50 d2/1: M10x1.50 A: 35MM d1: ball Ø16MM L2: 20MM |
1.38" 0.79" |
| Retracted Length (RL): Stroke + 165MM / 6.50" ( shortest possible ) | |||
| Extended length (EL): Stroke*2 + 165MM / 6.50" |
| Part # 676.12 | Rod end bearing RB10 | ||
|---|---|---|---|
|
|
d3: M10x1.50 L1: 43MM d1: Ø10MM L2: 28MM |
1.69" 0.39" 1.10" |
| Retracted Length (RL): Stroke + 181MM / 7.13" ( shortest possible ) | |||
| Extended length (EL): Stroke*2 + 181MM / 7.13" |
Options: |
|||
|---|---|---|---|
| - Damping: | RL and EL increase 86MM / 3.39" Progression approx. 25% | ||
| - Dust boot: | D |  |
|
| - Rod protector: | R |  |
Stroke reduction 5MM |
| - Low temperature -45°C / -49°F | A | ||
| - High temperature 200°C / 392°F | B | ||
| - Private label | P |
|
|
|||
| Product Inquiry example: | |||
| Part # | Stroke (S) MM/INCH | Retracted Length (RL) MM/INCH | Force N/Lbs | Options |
|---|---|---|---|---|
| 676.1 | 100 / 3.94 | 238 / 9.37 | 1000N / 225Lbs |
| Extended length (EL) of a gas compression spring is calculated when piston rod is fully extended |
| Force (F1) measured with piston rod 5MM/ 0.20" compressed |
| Progression rate will change depending on cylinder volume |
| Connecting parts are interchangeable, make your own combination or go to product category connecting parts to view more options |
| Please be advised that Extended Length EL2 will change depending on your choice of connecting parts |
An integral part of our customer service is helping customers with finding a replacement gas spring for their application. As we have thousands of numbers on file, we can crossover any brand to our high industrial quality gas springs. Please enter the number you want to crossover without dots/dashes/slashes etc. and our part number will appear. Please be advised that we update this list on a daily basis, should the number you want to crossover does not give a match please contact us and we will be happy to help you.
Search tip: due to a variety of forces in Lbs or N(ewton) just only enter a part number followed by the force. When a part number starts with a 0 (zero) just enter the number you want to cross reference without 0
For business inquiries please fill in the form below, or give us a call. We will contact you shortly.