Product Search: 

Contact Information

Gemini Gas Springs Inc.
1-6276 Pleasant Valley Road
P.O. Box 1023
Vernon B.C. V1T 6N2
Tel: +1 778 475-5611
 Fax: +1 877 554-6024




Prove his actions during the action levitra dosage varied but no problems and we can only rejoice at this.

Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.



The cylinders are very suitable to adjust structures as quietly, quickly and precisely as possible. Due to the simultaneous
control of up to 10 cylinders even highly complex structures are feasible. The cylinder is constructed for installation in
existing guides and should only be exposed to small side loads. It is used for height and tilt adjustments. The cylinder consists
of brass parts and a piston rod made of stainless steel.


The clamping ring and screws are there only to connect the hose to the pump and the cylinder (clamp ring screwing). The amount
needed for assembly is included with the system.
• Attachment screw thread M8 x 1


The flexible pressure hose has the followingproperties:

• Exterior diameter 4 mm

• Minimum bending radius 25 mm

• Max. operating pressure 100 bar


• Please adhere to the max. load of the complete system given in the selection table

• Load max. 1500 N per cylinder

• Cylinders up to 2500 N load upon request

• Lift length 150mm/6” up to 600 mm/25” other lengths or models upon request

• The cylinders should not be exposed to traction

• The cylinders are made for the installation into existing guides

• There is also the possibility to use food-friendly fluids

• Please visit for a complete range of cylinders

Sort by:

  • «« Start
  • « Prev
  • 1
  • Next »
  • End »»
Results 1 - 5 of 5